| 序号 | 标准号 | 标准名称 |
1 | ACI 104-1971 | Preparation of Notation for Concrete (Includes Commentary and Appendices) (Revised 1982) R(1997) |
2 | ACI 117-1990 | Standard Specification for Tolerances for Concrete Construction and Materials (ACI 117R-90) |
3 | ACI 117R-1990 | Commentary on Standard Specifications for Tolerances for Concrete Construction and Materials (ACI 117-90) |
4 | ACI 124.1R-1992 | Abstract: Esthetics in Concrete Slide Module S01-92 Bahai House of Worship R(1997) |
5 | ACI 124.2R-1994 | Mercer Mile Buildings |
6 | ACI 121R-1998 | Quality Management System for Concrete Construction |
7 | ACI 126.3R-1999 | Guide to Recommended Format for Concrete in Materials Property Database |
8 | ACI 126.1R-1997 | Guide to a Recommended Format for the Identification of Concerte in a Materials Property Database |
9 | ACI 201.1R-1992 | Guide for Making a Condition Survey of Concrete in Service R(1997) |
10 | ACI 116R-2000 | Cement and Concrete Terminology |
11 | ACI 207.3R-1994 | Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions |
12 | ACI 210.1R-1994 | Compendium of Case Histories on Repair of Erosion-Damaged Concrete in Hydraulic Structures R(1999) |
13 | ACI 207.5R-1999 | Roller-Compacted Mass Concrete |
14 | ACI 210R-1993 | Erosion of Concrete in Hydraulic Structures R(1998) |
15 | ACI 207.4R-1993 | Cooling and Insulating Systems for Mass Concrete R(1998) |
16 | ACI 207.2R-1995 | Effect of Restraint Volume Change and Reinforcement on Cracking of Mass Concrete |
17 | ACI 211.1-1991 | Standard Practice for Selecting Proportions for Normal Heavyweight and Mass Concrete |
18 | ACI 201.2R-1992 | Guide to Durable Concrete R(1997) |
19 | ACI 207.1R-1996 | Mass Concrete |
20 | ACI 214.1R-1981 | Use of Accelerated Strength Testing R(1986) |
21 | ACI 211.4R-1993 | Guide for Selecting Proportions for High-Strength Concrete with Portland Cement and Fly Ash R(1998) |
22 | ACI 214.3R-1988 | Simplified Version of the Recommended Practice for Evaluation of Strength Test Results R(1997) |
23 | ACI 212.3R-1991 | Chemical Admixtures for Concrete |
24 | ACI 212.4R-1993 | Guide for the Use of High-Range Water-Reducing Admixtures (Superplasticizers) in Concrete R(1998) |
25 | ACI 211.5R-1996 | Guide for Submittal of Concrete Proportions |
26 | ACI 214-1977 | Recommended Practice for Evaluation of Strength Test Results of Concrete R(1997) |
27 | ACI 211.2-1998 | Standard Practice for Selecting Proportions for Structural Lightweight Concrete |
28 | ACI 213R-1987 | Guide for Structural Lightweight Aggregate Concrete R(1999) |
29 | ACI 211.3R-1997 | Guide for Selecting Proportions for No-Slump Concrete Supersedes ACI 2113 - 75 |
30 | ACI 222.2R-2001 | Corrosion of Prestressing Steels |
31 | ACI 221.1R-1998 | State-of-the-Art Report on Alkali-Aggregate Reactivity |
32 | ACI 216R-1989 | Guide for Determining the Fire Endurance of Concrete Elements R(1994) |
33 | ACI 215R-1992 | Considerations for Design of Concrete Structures Subjected to Fatigue Loading R(1997) |
34 | ACI 224.1R-1993 | Causes Evaluation and Repair of Cracks in Concrete Structures R(1998) |
35 | ACI 222.1-1996 | Provisional Standard Test Method for Water-Soluble Chloride Available for Corrosion of Embedded Steel in Mortar and Concrete Using the Soxhlet Extractor |
36 | ACI 222R-1996 | Corrosion of Metals in Concrete |
37 | ACI 216.1-1997 | Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies |
38 | ACI 223-1998 | Standard Practice for the Use of Shrinkage-Compensating Concrete |
39 | ACI 221R-1996 | Guide for Use of Normal Weight and Heavyweight Aggregates in Concrete |
40 | ACI 226.1R-1987 | Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete |
41 | ACI 226.3R-1987 | Use of Fly Ash in Concrete |
42 | ACI 230.1R-1990 | State-of-the-Art Report on Soil Cement R(1997) |
43 | ACI 224.3R-1995 | Joints in Concrete Construction |
44 | ACI 228.1R-1995 | In-Place Methods to Estimate Concrete Strength |
45 | ACI 228.2R-1998 | Nondestructive Test Methods for Evaluation of Concrete in Structures |
46 | ACI 224.2R-1992 | Cracking of Concrete Members in Direct Tension R(1997) |
47 | ACI 229R-1999 | Controlled Low-Strength Materials |
48 | ACI 225R-1999 | Guide to the Selection and Use of Hydraulic Cements |
49 | ACI 224R-1990 | Control of Cracking in Concrete Structures |
50 | ACI 301M-1999 | Specifications for Structural Concrete |
51 | ACI 232.1R-1994 | Use of Natural Pozzolans in Concrete Reported by ACI Committee 232 |
52 | ACI 233R-1995 | Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete |
53 | ACI 232.2R-1996 | Use of Fly Ash in Concrete |
54 | ACI 234R-1996 | Guide for the Use of Silica Fume in Concrete |
55 | ACI 303.1-1997 | Standard Specification for Cast-In-Place Architectural Concrete |
56 | ACI 232.1R-2000 | Use of Natural Pozzolans in Concrete Reported by ACI Committee 232 |
57 | ACI 303R-1991 | Guide to Cast-In-Place Architectural Concrete Practice |
58 | ACI 301-1999 | Specifications for Structural Concrete |
59 | ACI 302.1R-1996 | Guide for Concrete Floor and Slab Construction |
60 | ACI 304.6R-1991 | Guide for the Use of Volumetric-Measuring and Continuous-Mixing Concrete Equipment R(1997) |
61 | ACI 304.1R-1992 | Guide for the Use of Preplaced Aggregate Concrete for Structural and Mass Concrete Applications R(1997) |
62 | ACI 306.1-1990 | Standard Specification for Cold Weather Concreting R(1998) |
63 | ACI 304.5R-1991 | Batching Mixing and Job Control of Lightweight Concrete R(1997) |
64 | ACI 304.3R-1996 | Heavyweight Concrete: Measuring Mixing Transporting and Placing |
65 | ACI 304.4R-1995 | Placing Concrete with Belt Conveyors |
66 | ACI 305R-1999 | Hot Weather Concreting |
67 | ACI 306R-1988 | Cold Weather Concreting R(1997) |
68 | ACI 304.2R-1996 | Placing Concrete by Pumping Methods |
69 | ACI 304R-2000 | Guide for Measuring Mixing Transporting and Placing Concrete R(1997) |
70 | ACI 309.3R-1992 | Guide to Consolidation of Concrete in Congested Areas R(1997) |
71 | ACI 309.1R-1993 | Behavior of Fresh Concrete During Vibration R(1998) |
72 | ACI 307-1998 | Design and Construction of Reinforced Concrete Chimneys |
73 | ACI 307R-1998 | Commentary on Standard Practice for the Design and Construction of Reinforced Concrete Chimneys ACI 307-98 |
74 | ACI 308.1-1998 | Standard Specification for Curing Concrete |
75 | ACI 309.2R-1998 | Identification and Control of Visible Effects of Consolidation on Formed Concrete Surfaces |
76 | ACI 311.1R-1999 | ACI Manual of Concrete Inspection Ninth Edition; SYNOPSIS ONLY |
77 | ACI 309.5R-2000 | Compaction of Roller-Compacted Concrete |
78 | ACI 308-1992 | Standard Practice for Curing Concrete R(1997) |
79 | ACI 309R-1996 | Guide for Consolidation of Concrete |
80 | ACI 318.1/318.1R-1992 | Building Code Requirements for Structural Plain Concrete (ACI 3181-89) (Revised 1992) and Commentary - ACI 3181R -89 (Revised 1992) |
81 | 82 ACI 318.1M-1992 | Building Code Requirements for Structural Plain Concrete SYNOPSIS ONLY |
82 | ACI 318.1RM-1992 | Commentary on Building Code Requirements for Structural Plain Concrete SYNOPSIS ONLY |
83 | ACI 315R-1994 | Manual of Engineering and Placing Drawings for Reinforced Concrete Structures (ACI 315R-94) |
84 | ACI 313R-1997 | Commentary on Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials 313-97 |
85 | ACI 311.5R-1997 | Guide for Concrete Plant Inspection and Field Testing of Ready-Mixed Concrete |
86 | ACI 315-1999 | Details and Detailing of Concrete Reinforcement |
87 | ACI 313-1997 | Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials 313R-97 |
88 | ACI 311.4R-2000 | Guide for Concrete Inspection |
89 | ACI 318/318R-1999 | Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary (ACI 318R-99) |
90 | ACI 325.11R-2001 | Accelerated Techniques for Concrete Paving |
91 | ACI 325.1R-1967 | Design of Concrete Overlays for Pavements |
92 | ACI 318M-1983 | Building Code Requirements for Reinforced Concrete Supplement - 1986 |
93 | ACI 325.3R-1985 | Guide for Design of Foundations and Shoulders for Concrete Pavements (Revised 1987) |
94 | ACI 325.6R-1988 | Texturing Concrete Pavements R(1997) |
95 | ACI 325.7R-1988 | Recommendations for Designing Prestressed Concrete Pavements |
96 | ACI 318RM-1989 | Commentary on Building Code Requirements for Reinforced Concrete Supplement - 1986 |
97 | ACI 325.5R-1990 | Design of Continuously Reinforced Concrete Pavement for Airports |
98 | ACI 325.10R-1995 | State-of-the-Art Report on Roller-Compacted Concrete Pavements |
99 | ACI 318M/318RM-1999 | Building Code Requirements for Reinforced Concrete (ACI 318M-99) and Commentary (ACI 318RM-99) |
100 | ACI 332R-1984 | Guide to Residential Cast-in-Place Concrete Construction |